better still, can I start AVT and only open the libraires I am interseted in
thanks
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Is it inadvisable to close the country libraries we don't use?
I think you can disable certain libraries from opening but not sure how to do this as not in front of AVT at present.
AEC Collection 2026 UKIE (mainly Civil 3D UKIE and IW)
Win 11 Pro x64, 1Tb Primary SSD, 1Tb Secondary SSD
64Gb RAM Intel(R) Xeon(R) W-11855M CPU @ 3.2GHz
NVIDIA RTX A5000 16Gb, Dual 27" Monitor, Dell Inspiron 7760
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
AEC Collection 2026 UKIE (mainly Civil 3D UKIE and IW)
Win 11 Pro x64, 1Tb Primary SSD, 1Tb Secondary SSD
64Gb RAM Intel(R) Xeon(R) W-11855M CPU @ 3.2GHz
NVIDIA RTX A5000 16Gb, Dual 27" Monitor, Dell Inspiron 7760
Hi Joe
Yes you can start AVT with only the libraries you require showing without any problems. This is done via the System Settings -> AutoLoad dialog
.
Select as required.
If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!
Viji.Kumar
Hi Viji
I cleared all the libraries I do not need, answered affirmative to keep setting for future, but all the libraries still load. Is the a dialog I may be missing?
I cleared all the libraries I do not need, answered affirmative to keep setting for future, but all the libraries still load. Is the a dialog I may be missing?
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Accepted solution
Hi Joe
When you remove libraries and then make that the default, the libraries will continue to show when you open the Vehicle Library Explorer; this is until you shut down AutoCAD or Civil 3D. When you re-open it, the libraries should no longer be there.
Please note though, if you add libraries, they appear the next time you open the Vehicle Library Explorer.
I hope that helps.
Viji
Viji.Kumar
Thanks. It worked after a work station restart.
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
It would be great if this could be an option in the deployment setup. Having to adjust this per user is time consuming at best. Since I can't add it to the AUGI wish list, I'll just vocalize it here. 😉
Kimberly Fuhrman, LEED AP BD+C
Freelance Architectural Technologist
