Just a suggestion

[Anonymous]

Since there are ditinct differences in VBA as well as AutoLISP between
releases, it would be beneficial for everyone if we started identifying the
release of AutoCAD we are attempting to customize. Also, please distinguish
between VB5/VB6/VBA as well as LISP/VisualLISP. I've seen a lot of good
advice go down the tubes because replies were given for the wrong version
and/or language. Let's make it a little easier to help one another.

[Anonymous]

Sorry Frank,

I was one of the persons you are referring.
I'll remember to do that next time.

Thanks for you help
Jeff

Frank Oquendo wrote in message <855q2q$k3q3@adesknews2.autodesk.com>...
>Since there are ditinct differences in VBA as well as AutoLISP between
>releases, it would be beneficial for everyone if we started identifying the
>release of AutoCAD we are attempting to customize. Also, please distinguish
>between VB5/VB6/VBA as well as LISP/VisualLISP. I've seen a lot of good
>advice go down the tubes because replies were given for the wrong version
>and/or language. Let's make it a little easier to help one another.
>
>

[Anonymous]

Hi Frank,

This should be more than a suggestion. It should be mandatory.

To make it easy create a signature with the data in it and add the signature
to your mail. I keep numerous signatures in Outlook Express and just call
the appropriate one.
See [Tools][Options] and look under the Signatures tab in v5. Under the
'Advanced' Option you can even make that signature the default one to go to
the newsgroup.

The sample signature I just created follows.

Autodesk Product: LDT v2
VB Product VBA

Regards

Laurie Comerford

Frank Oquendo wrote in message
news:855q2q$k3q3@adesknews2.autodesk.com...
> Since there are ditinct differences in VBA as well as AutoLISP between
> releases, it would be beneficial for everyone if we started identifying
the
> release of AutoCAD we are attempting to customize. Also, please
distinguish
> between VB5/VB6/VBA as well as LISP/VisualLISP. I've seen a lot of good
> advice go down the tubes because replies were given for the wrong version
> and/or language. Let's make it a little easier to help one another.
>
>

[Anonymous]

That's a good idea. In fact, I'm going to create my signatures right away.
Thanks for the tip!

Laurie Comerford wrote in message
news:8585cj$mtk10@adesknews2.autodesk.com...
> Hi Frank,
>
> This should be more than a suggestion. It should be mandatory.
>
> To make it easy create a signature with the data in it and add the
signature
> to your mail. I keep numerous signatures in Outlook Express and just call
> the appropriate one.
> See [Tools][Options] and look under the Signatures tab in v5. Under the
> 'Advanced' Option you can even make that signature the default one to go
to
> the newsgroup.
>
> The sample signature I just created follows.
>
>
> Autodesk Product: LDT v2
> VB Product VBA
>
> Regards
>
> Laurie Comerford
>
>
>
> Frank Oquendo wrote in message
> news:855q2q$k3q3@adesknews2.autodesk.com...
> > Since there are ditinct differences in VBA as well as AutoLISP between
> > releases, it would be beneficial for everyone if we started identifying
> the
> > release of AutoCAD we are attempting to customize. Also, please
> distinguish
> > between VB5/VB6/VBA as well as LISP/VisualLISP. I've seen a lot of good
> > advice go down the tubes because replies were given for the wrong
version
> > and/or language. Let's make it a little easier to help one another.
> >
> >
>

[Anonymous]

Wow, Frank;
You mean there's something you DIDN'T already know?
I've only been perusing this NG for a few months, but you've replied to
several of my questions, and I certainly appreciate it, as I'm sure a lot of
other people do. You are one of the "Gods" of this NG. Thanks.

Frank Oquendo wrote in message <8587fl$mt612@adesknews2.autodesk.com>...
>That's a good idea. In fact, I'm going to create my signatures right away.
>Thanks for the tip!
>
>Laurie Comerford wrote in message
>news:8585cj$mtk10@adesknews2.autodesk.com...
>> Hi Frank,
>>
>> This should be more than a suggestion. It should be mandatory.
>>
>> To make it easy create a signature with the data in it and add the
>signature
>> to your mail. I keep numerous signatures in Outlook Express and just
call
>> the appropriate one.
>> See [Tools][Options] and look under the Signatures tab in v5. Under the
>> 'Advanced' Option you can even make that signature the default one to go
>to
>> the newsgroup.
>>
>> The sample signature I just created follows.
>>
>>
>> Autodesk Product: LDT v2
>> VB Product VBA
>>
>> Regards
>>
>> Laurie Comerford
>>
>>
>>
>> Frank Oquendo wrote in message
>> news:855q2q$k3q3@adesknews2.autodesk.com...
>> > Since there are ditinct differences in VBA as well as AutoLISP between
>> > releases, it would be beneficial for everyone if we started identifying
>> the
>> > release of AutoCAD we are attempting to customize. Also, please
>> distinguish
>> > between VB5/VB6/VBA as well as LISP/VisualLISP. I've seen a lot of good
>> > advice go down the tubes because replies were given for the wrong
>version
>> > and/or language. Let's make it a little easier to help one another.
>> >
>> >
>>
>
>

[Anonymous]

Stop it. I'm just sharing what others in these groups once shared with me.

"Dave Plumb" wrote in message
news:85cuja$jh11@adesknews2.autodesk.com...
> Wow, Frank;
> You mean there's something you DIDN'T already know?
> I've only been perusing this NG for a few months, but you've replied to
> several of my questions, and I certainly appreciate it, as I'm sure a lot
of
> other people do. You are one of the "Gods" of this NG. Thanks.

[Anonymous]

Frank,

By reading this response, I can see who has the ego (I don't want to name
names but his initials are T.T). I read your string with him in the
customization NG and found it humorous to say the least. Some people don't
know when to say when.

Thank you for all your help in this NG. Keep up the good work.

Mark Smith

Frank Oquendo wrote in message
news:85cv7f$j818@adesknews2.autodesk.com...
> Stop it. I'm just sharing what others in these groups once shared with me.
>
> "Dave Plumb" wrote in message
> news:85cuja$jh11@adesknews2.autodesk.com...
> > Wow, Frank;
> > You mean there's something you DIDN'T already know?
> > I've only been perusing this NG for a few months, but you've replied to
> > several of my questions, and I certainly appreciate it, as I'm sure a
lot
> of
> > other people do. You are one of the "Gods" of this NG. Thanks.
>
>

[Anonymous]

Again, stop it. I have an ego alright. It's just not as large and
self-serving as others.

Mark Smith wrote in message
news:85f6kf$6089@adesknews2.autodesk.com...
> Frank,
>
> By reading this response, I can see who has the ego (I don't want to name
> names but his initials are T.T). I read your string with him in the
> customization NG and found it humorous to say the least. Some people
don't
> know when to say when.
>
> Thank you for all your help in this NG. Keep up the good work.
>
> Mark Smith

[Anonymous]

Wow.
I just read the thread in the customization NG, and I'm even more glad that
I first complimented Frank.

Mark Smith wrote in message <85f6kf$6089@adesknews2.autodesk.com>...
>Frank,
>
>By reading this response, I can see who has the ego (I don't want to name
>names but his initials are T.T). I read your string with him in the
>customization NG and found it humorous to say the least. Some people don't
>know when to say when.
>
>Thank you for all your help in this NG. Keep up the good work.
>
>Mark Smith
>
>
>Frank Oquendo wrote in message
>news:85cv7f$j818@adesknews2.autodesk.com...
>> Stop it. I'm just sharing what others in these groups once shared with
me.
>>
>> "Dave Plumb" wrote in message
>> news:85cuja$jh11@adesknews2.autodesk.com...
>> > Wow, Frank;
>> > You mean there's something you DIDN'T already know?
>> > I've only been perusing this NG for a few months, but you've replied to
>> > several of my questions, and I certainly appreciate it, as I'm sure a
>lot
>> of
>> > other people do. You are one of the "Gods" of this NG. Thanks.
>>
>>
>
>

[Anonymous]

You guys are embarassing me. Thank you but please knock it off. I'm just
here to learn what I can. If what others taught me can help someone else,
it's my obligation to share. That's all and nothing else. Believe you me,
I'll be charging for the first bit of original, saleable programming I can
come up with.

Dave Plumb wrote in message
news:85ft8j$7l815@adesknews2.autodesk.com...
> Wow.
> I just read the thread in the customization NG, and I'm even more glad
that
> I first complimented Frank.