Hi,
Just wanted to do a simple 2-D analysis but cannot change it to 2-D type (could before...)
My model is very simple also in the attachment if you want to see.
What i did is:
1. Start a new analysis
2. Use the sketch option to put 4 (2 for each part) circles in one plane
3. 2-D mesh both parts
4. Trying to select element type 2-D and its missing (usually it is selected by default)
Am I doing something wrong or I'm missing something ?
Hi @Anonymous,
In order to use 2D elements, your drawing should be on the YZ plane at X=0. If you're importing a model in DWG form, there should be an option to transform the geometry to a specific plane. We do have a tip in the 2D element help page of how to transform your drawing if you accidentally drawn in the wrong plane.
Pattern Relocate & Scale, Draw Pattern Rotate or Copy, and Draw Modify Project to Plane. For example, you may accidentally create a mesh in the XY plane. You can rotate the mesh to the YZ plane using either the Relocate & Scale or Rotate command. Due to round-off, some nodes may have a small X coordinate value that prevents the element type from being set to 2D. In this case, use Project to Plane to snap the nodes exactly to the YZ plane.If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!
