Spring elements in Robot Structural Analysis

Spring elements in Robot Structural Analysis

Anonymous
Not applicable
2,619 Views
3 Replies
Message 1 of 4

Spring elements in Robot Structural Analysis

Anonymous
Not applicable

Hello.

 

I have the following question: it is possible in Robot Structural Analysis define spring elements, connecting two nodes of different bars (like in the image attached)? I want to connect two points of different elements, which are connected with a certain stiffness (in my case, translational stiffnesses).

 

Thanks in advance.

 

Regards,

Ricardo Dias.

0 Likes
Accepted solutions (1)
2,620 Views
3 Replies
Replies (3)
Message 2 of 4

Rafal.Gaweda
Autodesk Support
Autodesk Support
Connect node 1 with node 2
Use elastic bar release(s) on beam or column


Rafal Gaweda
0 Likes
Message 3 of 4

Anonymous
Not applicable

I thought about that possibility, but in my case I want to have a certain eccentricity between the nodes.

For instance: I have two vertical bars, connected with bolts, side by side. Because their gravity center is different, I have to simulate them with an eccentricity. Is this possible to simulate in Robot?

I want to have the behavior of the bars bolted together, with a certain stiffness. In this case, the spring elements are to simulate the bolted connection.

 

Thank you.

 

Regards,

Ricardo Dias. 

0 Likes
Message 4 of 4

Rafal.Gaweda
Autodesk Support
Autodesk Support
Accepted solution

@Anonymous wrote:

I thought about that possibility, but in my case I want to have a certain eccentricity between the nodes.

 

Connect node 1 and node 2 with rigid link, add elastic release(s) on beam \ column.

 

For instance: I have two vertical bars, connected with bolts, side by side. Because their gravity center is different, I have to simulate them with an eccentricity. Is this possible to simulate in Robot?

I want to have the behavior of the bars bolted together, with a certain stiffness. In this case, the spring elements are to simulate the bolted connection.

 

If I understood you correctly:
- bolt - as bar with rather high stiffness - you will not loot at results in them
- elastic release(s) on bolts with correct spring values



Rafal Gaweda
0 Likes