Send model From Revit to Robot

[chainarong.bk]

Plase help me i have proplem when i send model from revit to robot as show on attached picture, position and sizing of model in robot it is not correct also attached file revit and robot.

[chainarong.bk]

Plase help me i have proplem when i send model from revit to robot as show on attached picture, position and sizing of model in robot it is not correct also attached file revit and robot.

[chainarong.bk]

Plase help me i have proplem when i send model from revit to robot as show on attached picture, position and sizing of model in robot it is not correct also attached file revit and robot.

[chainarong.bk]

Attached file Revit and Robot

[napooil · Accepted solution]

Analytical in revit.It seem in robot.

[chainarong.bk]

Thanks for your help, when i make the wall on the slab that not sit on edge of slab the analytical model will be automatic adjust as show on your picture i have to change "Edge Horizontal Alignment" From "Auto-Detect" to "projection"(See attached picture) after changed the wall can be sit on any position on slab 🙂