RTRKK profile database almost empty (ARSA 2015)

RTRKK profile database almost empty (ARSA 2015)

Jummybear
Collaborator Collaborator
877 Views
6 Replies
Message 1 of 7

RTRKK profile database almost empty (ARSA 2015)

Jummybear
Collaborator
Collaborator

There is a small "war" is going after installation of ARSA 2015. Some things are already fixed, some not.

I found that RTRKK database in Robot 2015 is almost empty. Can I fix that? Printscreens included.

0 Likes
Accepted solutions (1)
878 Views
6 Replies
Replies (6)
Message 2 of 7

Rafal.Gaweda
Autodesk Support
Autodesk Support
Accepted solution
There are no angles in Rautarukki database.
Click on first icon from the left on Standard tab


Rafal Gaweda
0 Likes
Message 3 of 7

Jummybear
Collaborator
Collaborator
Unfortunatelly pressed as accepted as solution, but actually its still not.
In previous versions of Robot I had angles, IPE/HEA, C shaped profiles and so on. Now I have only 3 types: Round section, square section and rectangular section. At the same time Suomi (Finland) database has all of them and as I know finland database should be the same as RTRKK database, or am I wrong?
0 Likes
Message 4 of 7

Rafal.Gaweda
Autodesk Support
Autodesk Support

I am afraid you are wrong:

 

rtrk2013.jpg



Rafal Gaweda
0 Likes
Message 5 of 7

Jummybear
Collaborator
Collaborator
I repeat once more: finnish profile database is based on ruukki profiles. You confirmed that here: http://forums.autodesk.com/t5/robot-structural-analysis/is-it-possible-to-update-renew-profile-datab...
Here you can download Ruukkii profile catalogue http://www.ruukki.com/Steel/Stock-products-and-prefabrication-services--catalogue
And there all mentioned above profiles listed: IPE, HEA, angles, C sections and so on. I can download and attach this catalogue to the next my post if you want, it weights 8mb 😃
0 Likes
Message 6 of 7

Rafal.Gaweda
Autodesk Support
Autodesk Support
I think I miss something or you did not understood me.
My intention was to tell you that there are NO such families in Robot Rautaruukki database
because :
http://forums.autodesk.com/t5/robot-structural-analysis/is-it-possible-to-update-renew-profile-datab...


Rafal Gaweda
0 Likes
Message 7 of 7

Rafal.Gaweda
Autodesk Support
Autodesk Support

The families you are lookig for are located in standard european database:

 

standardeuropean.jpg



Rafal Gaweda
0 Likes