Robot 2022

[Romanich]

The new Robot is here! 

What's new: https://help.autodesk.com/view/RSAPRO/2022/ENU/?guid=GUID-CDBFEAA4-0FFB-41AC-AB8A-79F5C413C221

What was fixed: https://help.autodesk.com/view/RSAPRO/2022/ENU/?guid=Robot_ReleaseNotes_2022_release_notes_html

Many thanks to the Dev and Support teams!

P.S. Finally we can now use diaphragm for a floor and automatically create the primary node for a storey floor at the Gravity Center of a storey projected on the floor plan. It seems that after 3 years the approach from my Diaphragmer app was recognized 🙂

[StefanoPasquini6790]

Dear dev team,

I would send my personal congratulation for this 2022 version, that since 2015 do not have so great improvement. It's all incredibly useful and made it in the right direction....

Thank you, thank you, thank you!

[teixeiranh]

Thanks to the developer team! A lot of wished upgrades! Keep it up!

[KrzysztofZajączkowski7339]

But where are gravity analysis and stiffness reduction dor Direct Analysis Method for concrete element? 

[okapawal]

Thank you all for the good words.

Roman, how did you find help publication yesterday?  RSA 2022 went live today.

I must say that your Diaphragmer is still bit better than the in-product functionality 🙂

[Romanich]

Hi Waldemar,

There is a trick that is working for years: just change the version in the hyperlink  https://help.autodesk.com/view/RSAPRO/2022/ENU/?guid=GUID-CDBFEAA4-0FFB-41AC-AB8A-79F5C413C221

Regarding the Diaphragm Primary Node for a Storey  - it seems that the node still not accessible and there is not possible to assign the load manually to this node. In this case, my Diaphragmer is still a bit better 🙂

Could you please highlight any changes or improvements in API?