No option for Moving Loads for Building and Plate model types

[Anonymous]

Hi,

A quick query, I am looking to use Robot to check a stypical slab for moving mobile crane loads, and i though running a few lines of crane movement across typical spans will do the trick, however, I can not seem to find the option for moving loads. I know that it is suppose to be in Loads=> special loads => moving loads, but as you can see from the attachment, it is not there... any ideas?

@Anonymous Artur Kosakowski edited the topic for better findability 

[MUHANNAD.ABU_ABDO]

There's no option of moving load in building model !

[Anonymous]

Im sorry, can you please clarify? Do you mean I should goto the "Loads" lay out tab? I have tried that, and the option is still unavailable.

[MUHANNAD.ABU_ABDO · Accepted solution]

No .. you must try with frame 3d or shell design .. there's option for moving load in this choice

[MUHANNAD.ABU_ABDO]

That's what i mean ... in the frame 3d there's option for moving load

[Rafacascudo · Accepted solution]

Tools/customize/customize menu/Loads/Special loads and click on moving to turn it into green

[Artur.Kosakowski]

or you can change the model to a shell (Geometry > Structure Type).

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[Anonymous]

This was certainly helpful. CHeers