Load issue in Nonlinear analysis

[Anonymous]

Dear,

I have problem with assembling selfweight to another load case automatically when performing non-linear analysis.

Why the software does that? This cousing me a problem in reactions report report because I have added selfweight in different load case.

Please help

Regards

Ivan Matoric

[Rafal.Gaweda · Accepted solution]

I guess you have cables in model.
It is correct - assembling load case is case 1

[Anonymous]

Hi Rafal,

yes I have cables in the model.

Why that chage the situation I mean is that something that is normal for the Robot to do when I use cable elements.

If it is how I could avoid that? Should I use only tension member elements insted of cable elemens?

Thanks

Ivan

[Rafal.Gaweda]

Why that chage the situation I mean is that something that is normal for the Robot to do when I use cable elements.

http://help.autodesk.com/view/RSAPRO/2016/ENU/?guid=GUID-C718E208-2359-49A0-9C8E-FAB4EA496948

If it is how I could avoid that? Should I use only tension member elements insted of cable elemens?

Can be.