Question: Where can I find a list of the latest Autodesk Knowledge Network support solutions that were created and/or updated for Robot Structural Analysis?
(List shown in chronological order)
ARCHIVE
January - February 2016
How to define compatible nodes
How to define seismic or spectral cases
How to ignore some bars in a cladding load distribution
How to open file in repair mode
How Wind Load Simulation Works
Incorrect display of (exact) deformation diagram and corresponding values for more than one case
Lateral buckling: Critical moment differences between super member and its components (Robot)
RC Slab Provided Reinforcement - error: “For top or bottom reinforcement in the direction of X or Y
Structure verification-Warning message “Parameters of the material used in the object are different
March 2016
ROBOT - STEEL DESIGN - calculations dialog box is not correctly displayed
Strange patches or strips on maps
April 2016
ROBOT-Model editing-how to change the section color
Get Up to Speed: Robot Structural Analysis 2017
May 2016
How to understand the thermal effects in a building including bars and panels.
Nodes defined along a cable are reported as isolated
June 2016
Corrupted units in job preferences leading to obtain incoherent results
How to define a time history analysis and how to explore results
How to run model calculations with reduced stiffness of concrete columns and beams
JOB PREFERENCES - empty material lists
RC reinforcement bar database edition - it impossible to open database editor
Robot model definition: How to offset the support of the structure
Panel calculation model- one way simplified transfer of loads
July 2016
Error: “rohtml.dll not found” during attempt to calculate steel connection
How to apply soil elasticity on a raft created as a panel
How to create a moving load in Autodesk Robot Structural Analysis Professional
How to clear out recently used projects in Robot
How to set hydrostatic pressure load on model
August 2016
Multiple nodes numbered « 0 » (zero) displayed in the nodes table
Non-convergence of a model with unidirectional supports or soil (uplift allowed)
RC SLAB PROVIDED REINFORCEMENT - can definition of zones be saved as dwg or dxf file
RC SLAB REQUIRED REINFORCEMENT - how punching reinforcement is calculated?
Results analysis-Sign convention for bar elements
ROBOT - Load to mass conversion - conversion of combination is disregarded
ROBOT - RC COLUMN DESIGN - impossible to change status from red ? (question mark) to OK
SEISMIC ANALYSIS - how to scale base shear in seismic load
Seismic analysis for nonlinear model
September 2016
Bar element displayed as a blue dotted line
Buckling Analysis-find Alpha-cr for structural analysis according EN1993-1-1
How do I model a structure with 10% base fixity?
How to activate seismic provisions in the provided reinforcement modules
How to create a nodal elastic support
How to determine base shear under seismic actions
How to switch off use of kinematic constrains
RC DRAWINGS - no bar diameter on drawing
ROBOT and Advance Steel Interoperability
ROBOT-Steel design-How to run a fire analysis for Eurocode 3 based codes
Steel Design - no buckling check
Steel Design - which of available design codes support thin walled section verification
October - November 2016
How to delete already defined loads
How to download Robot to Advance Steel 2016 link?
How to obtain shear forces acting at the bottom of a wall.
Modal analysis - warning:‘Number of missing eigenvalues found’
Modeling – How to define an opening in a cladding or a panel
No convergence during non-linear analysis on a model with uplift definition of supports
Not possible to change row height in all tables
Panels \ walls not displayed in Object Inspector
Printout composition – screen captures of the structure view are black
RC BEAM - How to design (T shape) beam defined under slab
Registering, reregistering, running two or more different RSA versions on the same computer
Required reinforcement for plate and shell-Reduction of forces above supports
ROBOT - STEEL DESIGN - NBN EN - incorrect use of method 2 for stability check
Warning: “Isolated nodes have been found” reported for nodes that don’t exist in a model
What stiffness matrix is used for modal analysis for nonlinear model
December 2016
How to create a floor that would act as a rigid diaphragm
ROBOT - DIAGRAMS FOR BARS - how to reset the display to the default scale
ROBOT – How to recover a lost .rtd file form a .bak file.
ROBOT - RC Beam Design - error: ‘Static analysis. Incorrect support definition’
ROBOT - RC Deep-Beam : “New deep beam” icon is grayed
ROBOT API - how to use Mirror command
ROBOT-Steel design-Eurocode 3 does Robot consider torsion during the members verification
ROBOT-Steel design-How the Internal bracing feature works.
Very big rtd file of a small model
