Distribution reinforcement

[MUHANNAD.ABU_ABDO]

I'm working at unrwa .and i use BeamD to design reinforced concrete frames ? now we bought Robot structural analysis 2015 and i'm wondering if it's possible to distribute reinforcement in the frame section like in the pic ( cage method ) because this way is more practical to us .. i hope get answer as soon as possible 

Thanks in advance 

[Artur.Kosakowski]

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[MUHANNAD.ABU_ABDO]

Thanks for your response .. look at this pic ?

[Artur.Kosakowski]

Too narrow beam? 

[MUHANNAD.ABU_ABDO]

No .. and the depth of frame 600mm so if there's problem .. the robot must distribute the reinf. on layers ?? 

[MUHANNAD.ABU_ABDO]

[Artur.Kosakowski]

Attach the file with the beam and make the sketch of the intended reinforcement arrangement. 

[MUHANNAD.ABU_ABDO]

Here is Robot & Autocad file for reinf. arrangement 

thanks in advance 

[Artur.Kosakowski]

You need to set the single span segment to divide reinforcement. "Vertical" U shape rebars as main reinforcement are not supported in Robot. 

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[MUHANNAD.ABU_ABDO]

Ok fair enough ... i hope see this option in the next versions of robot .. but the problems with reinf arrangements still ?? 

[Artur.Kosakowski]

No.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.