applying load to panel

[Anonymous]

hi guys,

I need your help, I have this warning that "linear load has not been applied to a panel" what should I do and how do I do it to solve to problem for me to proceed on my design. see attached please

thanks for your effect.

[Rafal.Gaweda]

Hi

Try this:

https://forums.autodesk.com/t5/robot-structural-analysis-forum/error-2110-problem-with-linear-loads/...

IF not, we need your model.

[Anonymous]

thanks. please I have attached the file now (zip). please look at it and tell met how to solve the problem or you do the correction and send it back to me.

thanks a lot.

[Rafal.Gaweda · Accepted solution]

You need to check claddings coordinates \ panels meeting with claddings coordinates

For example claddings such as  2507 2511 2527 2531 (and similar) should have Y coord = 12,250000000

Check them \ correct them looking at  load case 8

You may use this:

https://forums.autodesk.com/t5/robot-structural-analysis-forum/vba-excel-macro-for-any-object-geomet...