(API) Macro: Creation of quasi T & L RC beams

(API) Macro: Creation of quasi T & L RC beams

Romanich
Mentor Mentor
12,559 Views
30 Replies
Message 1 of 31

(API) Macro: Creation of quasi T & L RC beams

Romanich
Mentor
Mentor

Hi,

I developed small macro with custom functions which will help to create quasi T & L r.c. beams in accordance with the Artur's proposal mentioned in threads:

http://forums.autodesk.com/t5/Robot-Structural-Analysis/T-slab/m-p/3185418

http://forums.autodesk.com/t5/Robot-Structural-Analysis/Beam-offsets/m-p/3332921

 

Just input data in green cells and select the desired type of section to generate it in Robot. A section will be created with the special name. For example:

Qtbeams1.png

 

@Romanich Artur Kosakowski edited the topic for better findability 

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Accepted solutions (2)
12,560 Views
30 Replies
Replies (30)
Message 2 of 31

Rafal.Gaweda
Autodesk Support
Autodesk Support

Nice 🙂
Added to our list



Rafal Gaweda
Message 3 of 31

StefanoPasquini6790
Advisor
Advisor

Hi Roman,

 

As usual "TOP CLASS" member.

 

Thanks a lot for your API.

 

Smiley Wink


PasProStudio

www.pasquiniprogetti.eu

Structural + Detailing engineers
Message 4 of 31

Romanich
Mentor
Mentor
Accepted solution

Macro was significantly modified in accordance with ACI 318-14 p.8.4.1.8

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Message 5 of 31

StefanoPasquini6790
Advisor
Advisor

romanich.jpg


PasProStudio

www.pasquiniprogetti.eu

Structural + Detailing engineers
Message 6 of 31

Grohl
Advocate
Advocate
Accepted solution

"Stole" Romanich's work and added some support for EC2. Hope that's OK, Romanich?

 

Message 7 of 31

Romanich
Mentor
Mentor

Great, thanks Grohl!

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Message 8 of 31

Μηχανικος
Collaborator
Collaborator

Sounds great,  but how can someone actually use it? 

 

Can someone please describe a step by step procedure? and at which stage of the design someone can use it?

0 Likes
Message 9 of 31

Grohl
Advocate
Advocate

Is it something like this you want:

 

1. Decide what code to use, EC og ACI - ACI seem to have less parameter input than EC. 

2. Input necassary parameters to find the L/T beam ratio.

3. Export your section to Robot from Excel

4. Create a slab in RSAP (Dimensions should have been thaught about when creating your section in Excel from point 2)

5. Create beams, with the section you created in Excel, in your slab.

6. Apply boundary conditions

7. Calculate

Message 10 of 31

ledinhchinh0409
Advocate
Advocate

hi. Romanich. I do not understand the value of x? Why are 2, 3, 4. I'm just a beginner. Thank you!

Message 11 of 31

Romanich
Mentor
Mentor

Hi @ledinhchinh0409, please use v.01

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Message 12 of 31

mustafahesenow
Advisor
Advisor

Hi @Romanich

As always number one!

 

Many thanks.



Mustafa Hesenow
Senior Structural Design Engineer/MZP
LinkedIn

Message 13 of 31

ledinhchinh0409
Advocate
Advocate

Is it in Romanic 'spider Pro for Robot'? I am Vietnamese. Have you worked in Vietnam?

0 Likes
Message 14 of 31

Romanich
Mentor
Mentor

Xin chào @ledinhchinh0409

Yes and yes. I have been working in Vietnam approximately 1 year, in HCM. If you have an open position, just drop me a line. My bags are already packed.

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Message 15 of 31

Anonymous
Not applicable

THANK YOU I AM 

 
Beginner IF YOU HAVE VIDEO TO DO THIS TWO WAY RIBBED SLAB 
 
THANK YOU  
 
 
 
 
0 Likes
Message 16 of 31

Anonymous
Not applicable

 THANK YOU any body have video for this file am not successful for do it  if any body have 

 

0 Likes
Message 17 of 31

ledinhchinh0409
Advocate
Advocate

Dear @Romanich

Can we improve to automatically determine the T-L beam after the floor has been drawn?

0 Likes
Message 18 of 31

Grohl
Advocate
Advocate
You know what type it is based on where you want it in your slab. On the the boundary it will be a L and somewhere in the slab it will be a T.
Message 19 of 31

ledinhchinh0409
Advocate
Advocate

Hi. @grohl

Thanks for the quick reply.

I'm solving the problem with manually but when the concrete beam is thought intersection i can use the api to automatically.

0 Likes
Message 20 of 31

Anonymous
Not applicable

Thank you very much for sharing the API.

Can someone also share the API for Rectangular beams please?

0 Likes