Split rebar automatically

[TasnimTarannum]

Is it possible to split a single rebar or a set of rebars, like splitting each rebar exceeding a 12m length in a rebar set?

[veasnakimbitus · Accepted solution]

Hi @TasnimTarannum ,
Yes it is. For revision 2024 below, you can use 3rd party plug in like Graitec (https://www.graitec.com/Help/PowerPack_for_Revit/En/#t=Split_Rebar.htm)

or SOFiSTiK (https://docs.sofistik.com/2024/en/reinforcement/cmdref/modify/split.html#split)
For revision 2025, it has its default (wait and see the release by April) 

[jay_colcombe · Accepted solution]

At this time it is not possible without an addin such as Naviate/Graitec/CADSRC3D /RebarCAD/etc.

The workaround is to create 12m lengths and use the Rebar Constraints Tool to lock the bar ends both to the Start position (or other bars/references) and edit the Constrain dimensions to suit.

[rafaelPD66Z]

In Revit 2025 now is possible to do exactly that, but has some limitations, See the video below

https://youtu.be/ixwwGAidzi4