Hi, i need to split my 300 mm Generic concrete floor to hollow core slab. I marked my floor as structural element, i founded a hollow core slab family, and when i try to split. I got a error message: Hollow core slab with invalid thickness. Change the selected template family in Config or adjust the thickness of the slab to match. Maybe someone can help to solve the problem? I tried to make my generic floor 500,1000mm and thats didnt help.
Please review the following;
It appears you can only use 200mm a slab thickness with the OOTB Families!!!
I did have a play and placing in a 200mm and then editing afterwards to 300mm and clicking Cancel will give an output but probably not a full solution.
Hello,
Here is how ou can create you r hCS family to match the floor thickness:
https://help.autodesk.com/view/RVT/2023/ENU/?guid=GUID-E7D7E68A-7794-4458-A691-A1798733D2B2
Thank you,
As a Caveat, if you do not need to use it for Precast Design but more Structural representation i would recommend using a Structural Framing System with Precast Structural Framing Components as this shows the oblong voids as you would expect with deeper slabs
Can't find what you're looking for? Ask the community or share your knowledge.