Having the name of the structural components in Rebar Schedule

[geteway2digitalindia]

While deriving the Rebar Schedule dia wise I need to have the principal components like Footings F1, F2...F3 in the Rebar schedule.

How to achieve this....

[awes]

Use partition F1, F2 etc

[Tom_Kunsman]

There is a field in the rebar schedule called "Host Mark" - you can use this. Each footing then would need to have a Mark value. 

[jay_colcombe]

Can you not simply use Host Mark or Category?

Also utilise Partitions for more Grouping

[geteway2digitalindia]

Dear Jay

Can you pls share some guiding videos on Host Mark / Partition

Merry Christmas

[Tom_Kunsman · Accepted solution]

I posted something on using the Host Mark, please take a look. Also, the Rebar Partition is an Instance property of the rebars. You can select a grouping of bars and give it a Partition code/number. This parameter can then be scheduled, along with the Host Mark if you choose

[jay_colcombe]

This is simple schedule  creation methods by adding in extra parameters from the list 

When creating or editing the Rebar Schedule simply add in the Host Mark Fields.

This is a good guide

https://medium.com/autodesk-university/ten-tips-for-effective-rebar-detailing-in-revit-392551fb4384#...

[geteway2digitalindia]

"PARTITION" is working, however in a project where there are multiple similar structures like 2 nos F1, 2 nos F2...how do I gets "Count" field in the Rebar Schedule as 2 instead of 1.

Attached file shows that the schedule is showing all 5 rebar instances for 1st F1 followed by the same 5 rebar instances of the 2nd F1, by making the "Count" as 1.

How in schedule I can have the multiplied Count as 1 single item with the multiplication factor

[jay_colcombe · Accepted solution]

The EXACT solution is in the link!

No.8

 

[geteway2digitalindia]

Perfect solution....