Building Section mark not showing in the structure view

[REDO10]

Hi All,

Hi @ovidiu_paunescu 

In my project I can not display the building section mark that have an architecture discipline in the structure view, although I checked all the visibility parameters and view scale that is compatible between architecture view and structure view (see picture bellow)

I need to display this building section mark in the same placement in the structure view to indicate rebars detail in that place, so how do I do that?

finally I noticed that REVIT gave another number to my building section in the structure view so normally it’s the same number I have to display in the sheet, how do I fix that?

Thanks.

[L.Maas]

Probably the section view itself is not set to Structural discipline. If you set that section to structural I expect it will show.

Usually the number is the Detail Number.

The section automatically gets assigned a sequential number when placed on a sheet. You can modify it to another number/text.

[ToanDN · Accepted solution]

Change the section view from Architectural to Coordination discipline.

[REDO10]

@L.Maas 

@ToanDN 

Indeed, the section view is architectural and not structural and that’s what I’m trying to explain!!!
I want my architectural section to be displayed at the same time in my structural view because it cut in the same place and I want to display rebars detail in that specific placement.
I made two sections in the same place (one architectural and the other structural) but Revit gives me two different details numbers  while I want it to be the same number in the sheet!!

Thanks.

[REDO10]

Thanks ToanDN for this tip...my problem is solved now