model section view display in drawing .idw

[Anonymous]

I'm trying to do some detailing inRevit MEP 2015.  While creating detailed section elevations I've run into some problems turning on the MEP elements of the drawing.  This is a 20+ story building already completely drawn, but when trying to make a couple of MEP elevation views from certain floors, I can't seem to turn on the (already drawn) MEP equipment in section elevations.  How can I get them to be visible in the elevation view?  I need a quick resolution to this problem?  I have close to 50 elevation views I need to make and can't waste time on trying to fix this problem?  Please help?

Please include detailed steps to resolve this issue?

[AJA14]

Try these:
1- Open Elevation.
2- Scroll in the properties to check whether there is a view template assigned to the section.
3- If there is you need to modify the view template properties
4- If not, go to visibility graphics (Shortcut VV). Scroll down the list and turn on or off what you need or don't.
5- You can create a template from the current modifications by going to the view tab and selecting make view template from current view.
6- You can then assign or apply the template to all your sections or elevations in one click.

If you need more assistance let me know.

[Anonymous]

Thank You, I'll give it a try as soon as I get to work!

One other question though,  How do you turn on the room tag / identifier in the section / elevation view?

[AJA14]

You have to tag these separately since tags are annotations. Simply go to annotate, tag all, rooms.