MEP Legend Components

[PhilvK]

I am showing some basic electrical info on plan in my architectural model, am using basic components for duplex outlets and data outlets, and would like to create a symbol legend. The duplex outlet appears in the Legend component list, but the data ones don’t, presumably since they are MEP symbols. Is there a way to get the MEP symbols to appear also in the Legend?

[GungorOzay]

Hi,

Did you try this way ? Just create new legend, and in legend follow below picture.

[PhilvK]

Yes, I use the method you show in your images. Thank you for going to the
trouble. The issue I was having was that I presume that since I am working
in an architectural model, the 2 MEP components that I brought into the
Architectural model do not appear in the legend family selection list. I was
wondering if there was a way to get them to be recognized without having to
use an MEP based model.

[GungorOzay]

i guess only way here ;

https://forums.autodesk.com/t5/revit-architecture-forum/how-to-make-legend-from-a-linked-revit-model...

[PhilvK]

Thank you again. I will have to experiment with this approach.

Nothing to do with our topic, but do you (or anyone) know what the forum's
time stamp is based on? I replied to you this morning at 5:37, but the time
stamp says 2:37 am. Your reply is also 3 hours behind the time zone I am in.
Unless you are in California working late and the time is based on your
time.

[GungorOzay]

You are welcome. Yes you are right,something wrong in the forum 🙂

[ToanDN]

What MEP components are you trying to show on the legend?

[PhilvK]

'Telephone Devices: Telephone Outlet: Plain' and 'Data Devices: Data
Outlet: Plain'. They are in my model and on the plan, but don't appear in
the Legend Family list.

[martin_duvalEKCG4]

good morning,

i want to create complete legend for plumbing, hvac, gaz, compress air, etc

in the legend they have 

pipe (i dont know how to do that)

symbols in 2d (in legend revit place in 3d but how in 2d)

anotation  

abreviation

etc

like autocad

how to create that with "smart" things not just a drawing

thank you! (excuse my english)

[fabiosato]

Hello,

When composing a sheet, you can create a schedule for the information and combine it with a drawing.

There is an option to create images link them to the pipe types, and add them to the schedule; the images only appear in the sheets.