Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
If you change your LEVELS that was associated to an architectural model's TOS to their FFL in your own project will that create issues with the floor plans that are already created or will the views adjust to suit?
We have a floor plan that has parts of the floors above and below and it doesn't matter how we play around with the view range we just cant seem to get the floor plan correct as it was prior to re aligning the levels.
See the pic, which is of a 7th floor, but has parts of 8th and 6th on it...Should be View range I know!
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
no underlay enabled.....It turns out it was a glitch in Revit 2019............When we unload the link totally then reload the floors are as it should be....Strange...
ok. thanks. maybe just untick your use hardware acceleration and see if helps. thanks
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
