Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hello, this family has been puzzling me for a few days already.
It's an exit sign with options of how a notation would be shown and doesn't have a hosting (not face based or wall or ceiling based). When the fixture is selected and needed to be rotated, it creates a giant family selection and the center of rotation is is far away from the center. I can't find anything placed there.
Attached is the family in question. Thank you guys for your help, you have all been very helpful.
So a couple of things I have noticed and a couple of solutions I came up with. First of all the reason (Altough im not sure if its the exact reason) why the rotation point is so random is because there is a sheet family linked inside. This is also where the 2D annotation is drawn.
First solution: Delete the linked family (This will however remove the anotation symbol Second solution: Create a new Annotation family and replace the one created in the family Third solution (I would not advice to use though): Rotate the family using space bar or use spacebar to move the position of rotation.
Than there is also alot of unused data in this annotation sheet file. So I would recommend getting rid of it by replacing it. So option number 2
