Copy/Monitor Fixture moves!

[CarrieHoffman02]

This is the first project I've had this issue. When copy/monitoring a plumbing fixture, my new fixture moves! When I move it back into place, I get the error "Coordination Monitor alert : Relative position of two Fixtures changed". How do I solve this one? See video for my way of doing it, obviously I am doing it wrong.

http://www.screencast.com/t/7BiQIEZZd

TIA

Carrie

[Mahmoud.Ziedan · Accepted solution]

Dear,

When you copy monitor fixtures from a link Model, you will get an alert. To solve this go to Collaborate ,Coordination Review, then Select  the link and select your link. You will get a table and you will have a lot of settings to choose from. Then select “Ignore “or “move to “  depending on what you need.(Check attached).

Kindly if this solved your issue, mark as solution to help others.

[CarrieHoffman02 · Accepted solution]

This is true but isn't exactly what I was talking about. I wasn't physically moving the fixture. When I copied it for the first time, it was placed incorrectly in the wrong spot thus creating the error saying it had been moved. Normally when you copy something it comes in perfectly in the same spot. I had to delete the family and start over and that fixed it. I forgot I had posted about it and didn't come back to clarify. So Yes if I get the error that something moved I go to the dialog box and ignore or fix it, but in this case I had to completely delete and reload my fixture. 

Thanks

Carrie