Zero threshold

[Debfar]

Hi, community, 

how to achieve a zero threshold? 

I have a sliding patio door that divides the exterior and interior and the door track needs to be flush with both floors. How to do that? Does anyone have a sliding door family with this integrated threshold? Thank you 

[ToanDN · Accepted solution]

- Edit the door family, remove the cut opening and replace it with a void to cut the host wall. 

- Model the track in the same family below the door then add another void the same volume as the track. 

- Uncut geometry or set the void to Not Cut geometry so that it does not cut the track.

- Set the family to Cut with Void and Loaded.

- Load the family in the project, it will cut the wall automatically.

- Use Cut geometry to further cut the floor with the door family then you will have a flush track embed in the floor.

[Debfar]

Thank you! that worked! I still don't have the right door system track, but this solution is great! thanks