window opening with three void

[ali_nabiY9TDJ]

hallo Gusy i need your help: iam  traying to bild Windows Family , and the opening make big problem becouse our wall contain  3 saparated wall, and the window should cut them all but with defferent size ( the cut should be deffernt not same long and wid and deffernt void shape ) and geometrie ,so i hvae treid to bulid 3 Voides in the family tow of them cutting there wall perfectly just the thered one not doing that : could you give me better idea how to do that 

[se.ha · Accepted solution]

Hi @ali_nabiY9TDJ 

• Did you cut the wall inside of your window family with each of your 3 voids?
• Are all of your separate walls in the model joined?
• Is the third void in the correct position and does it actually extend to where it should?

Can you upload your family?

[barthbradley]

Edit Family and Check Cuts With Voids When Loaded, reload into Project, press Cut Geometry and select elements to cut.  

[ali_nabiY9TDJ]

the option cut when load is already checked , the things is we dont want to do the cut manuely becos we have big projects and cut every window one by one is defficult, offcourse all the 3 walls ar joined 

[ali_nabiY9TDJ · Accepted solution]

thanks alot, i have not cut the thered void with my wall inside the family , now its working , thank you very much