Why is do sink families show up as transparent in plan

[roedigerF6NSW]

See attached. The sink shown is nested into an island family. I used the sink to cut the geometry of the counter and now the floor pattern is visible through the sink in plan. Anyone know why this is happening. I attached an axon view too, in this view the sink is showing correctly.

[ToanDN · Accepted solution]

Open the nested sink family and set the 3d sink to be visible for Plan/RCP and for all detail levels (coarse, medium, fine), the reload it.

[syman2000 · Accepted solution]

Edit the family and check and see if those 3d object is set to show in Plan

[roedigerF6NSW]

@syman2000 @ToanDN Thank you both