Wall Filled

[jorgedacunha60]

Good afternoon!

Someone help me out on this issue! I established and drew a wall on ground floor and 2nd ground floor.

On ground floor the wall showing blank and on 2nd floor showing filled. I need the wall showing filled on ground floor

and 2nd floor. I have attached both ground floor and 2nd floor.

Thanks,

George

[hmunsell]

is it the same wall spanning from Ground thru second floor? or do you have 2 sets of walls, one from ground to second and another from second to above?

• in the second floor plan, go to the View ribbon > View Templates > Create template from current view.
• the apply the new View template to the first floor

does the fill show up?

[barthbradley]

Maybe you are looking at the Coarse Fill/Color for the Wall. Change the Detail Level of the View to Coarse for both. 

[jorgedacunha60]

Thank you for your prompt reply. I would like to show both floors
fill/color. In this case what do you suggest I do?
Thanks,
George

[syman2000]

Check and see if there is a filter or wall cut graphic override? If that don't help, upload the file so we can take a look.

[barthbradley · Accepted solution]

If the orange fill is coming from the Wall's Coarse Scale Fill Color/Pattern, then change the View's Detail Level to Coarse to see the Coarse representation of the Walls

. 

[jorgedacunha60 · Accepted solution]

Hi Hmunsell!
These wall are the same type, but they are 2 wall ( from ground floor to
2nd floor) and (from 2nd floor to ceiling)

[hmunsell]

what happens if you draw the wall from ground to ceiling? does the same thing happen?

[barthbradley · Accepted solution]

oops...I noticed I circled the wrong icon in my last screenshot.