Wall and column issue

[Anonymous]

Hi guys,

I have some issue on wall and column.

the wall is trimmed whenever I aligned the edge of the wall to the column.

and the column is changing the hatch similar with wall.

I have attached the screenshot which supposed to be the result on the right image.

TIA guys

[Ilic.Andrej · Accepted solution]

If you want to model like shown on the picture to the right, use structural columns instead of architectural. Another option is to select wall ends , right click and "disallow join".

[Anonymous · Accepted solution]

Hello,

You are using the Architetural Column. In this case, the column Always get the wall material and hatch, even if you select another material in column configuration.

I suggest you change the Architetural Column for Structural Column, in this case the elements don't do the automatic join and don't mix the materials.

[ennujozlagam]

Pick your column  > edit family > in the properties > untick join geometry > save as to another filename or save as same name > load into your project > and change the old column with revised one. Thanks 

[Anonymous]

Hi guys, thanks for all your reply.

Unjoin geometry and disallow join works well.

Now I can sleep.

[ennujozlagam · Accepted solution]

@Anonymous  hello, that was my suggestion to you. thanks

"

Pick your column  > edit family > in the properties > untick join geometry > save as to another filename or save as same name > load into your project > and change the old column with revised one. Thanks "

[Corsten.Au · Accepted solution]

Wall Column Joining behavior

Hope this will help you

Cheers!

[Anonymous]

Thank you to all of you guys.

Really helpful your suggestion

This is the best site