Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Wall and Ceiling layers not joining correctly

11 REPLIES 11
SOLVED
Reply
Message 1 of 12
nemig
929 Views, 11 Replies

Wall and Ceiling layers not joining correctly

Having trouble getting my exterior "soffit" to join correctly with my exterior wall. It's a metal panel system that dies back into an eifs wall. The inside corner is working somehow but the outside is not. I'm using the pick walls tool when creating the ceiling and checking "extend into core". I've doubled checked the assemblies and unless I'm missing something they have the same layers with the same assignments, materials, and thicknesses. But I still can't get this outside corner to match up? Joining the geometry gets a few of the layers to match, but switching the join order isn't helping. It is only giving me the two options shown below.

I've looked into a bunch of similar threads and there seem to be workarounds for gyp on stud walls/ceilings that only have two layers but can't find anything about assemblies with 3 or more layers. Even with just gyp and stud it seems to be a pain point for a lot of other people. Is there a solution here other than resorting to cut profile or detail items/regions?

Thanks.

Labels (3)
11 REPLIES 11
Message 2 of 12
nemig
in reply to: nemig

Here are the assemblies. Wouldn't let me post more than 3 attachments in the original post !

Ceiling Assembly.pngWall Assembly.png

Message 3 of 12
barthbradley
in reply to: nemig

I'm not following. Might make more sense if you just post your file here and let us pick the views to examine to aid our understanding.   

Message 4 of 12
nemig
in reply to: nemig

Sure, see attached. Here's a pic of what I'm trying to make happen as well. I've used the cut profile tool but you can see that isn't a great solution either since it leaves lines behind and you cant control the lineweights.

Cut Profile Solution.png

Message 5 of 12
ToanDN
in reply to: nemig

Like this?

 

The last bit can be done via Cut Profile in view.

 

ToanDN_1-1657299972180.png

 

After fixed with Cut profile.

 

ToanDN_0-1657300057718.png

 

2022 file is attached.

 

 

 

 

Message 6 of 12
nemig
in reply to: nemig

Close! Outer layer looks good but not sure why the air gap, insulation, and sheathing don't match up as well though. It's odd ceiling-to-wall joins in section dont seem to behave the same way wall-to-wall joins do in plan.

Message 7 of 12
barthbradley
in reply to: nemig

this?

 

Join 78.png

Message 8 of 12
nemig
in reply to: nemig

Yes! What was your method there?

Message 9 of 12
barthbradley
in reply to: nemig


@nemig wrote:

Yes! What was your method there?


 

Me?  Parts.  For now.  Is that the condition you want?  

 

....Merged Parts. 

Message 10 of 12
nemig
in reply to: nemig

Yep, that's how I want it to look. I've experimented with parts but couldn't get the dividing lines between the parts to disappear like you did in yours. Are you using the lineweight tool to override them or something?

Message 11 of 12
barthbradley
in reply to: nemig


@nemig wrote:

Yep, that's how I want it to look. I've experimented with parts but couldn't get the dividing lines between the parts to disappear like you did in yours. Are you using the lineweight tool to override them or something?


 

No. All Parts.  It's a quick solution.  Activate shape handles, drag parts to meet and Merge Parts.  Bada Bing!  

 

 

Message 12 of 12
nemig
in reply to: nemig

Gotcha. I overlooked the merge parts button. I'll use that method moving forward (part of me wishes they would just do it automatically like walls though 😢. Seems like the natural behavior). 

 

Thanks for your help

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report