TopoSolid- Graphics

[jsandsSG3RZ]

See photo for reference. We have a walkout basement, I have to set the toposolid at the lowest grade as it will not allow me to bring the surface down if I set it at the top grade. But now I have a line that runs through(below the garage) and the hatch changes color above it. I can't adjust either.

The thickness of the toposolid I'm using is 20' and the elevation change is only 9' so I don't understand why it won't let me push down into the toposolid if I use the top grade as the starting point. Which would remove the line all together.

What to I do to get either option to work? 

[barthbradley]

Is it an override coming from the View Phase Filter?  Show Complete correct?  

[jsandsSG3RZ]

It's all "new construction". 

[barthbradley]

So, let's see if I'm reading you right.  You are talking about the difference in the cut patterns appearances; right? One appears lighter than the other.   Almost like it's half-toned.  

[jsandsSG3RZ]

Yes, and why there's a line.

[barthbradley]

Post your file.