Text becomes large and over lapping

[kyle.outland]

When trying to print to pdf. Texts comes out large and starts to over lap on the edges. Restarting machine and re opening Revit 2019 seems to fix it but becomes a pain when having to do that every time you want to print. Not sure what can be done to fix and would like some help on it!   Revit text issue.png

[barthbradley]

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/sfdcarticles/sfdcarticles/I...

[kyle.outland]

Unfortunately none of these seem to help the issue that we are having 

[syman2000]

Can you upload the sample and see if we can replicate issue you are having? What sort of text are you using to print? Some newer OTF text may have different scaling properties when print. This may mess up when you print from Revit to PDF.

[kyle.outland]

It is one of our staff that has the problem not myself. Century Gothic and Arial mostly for font. Everything looks fine before trying to print then once in print preview and printing becomes the issue.