Sink Hidden By Countertop

[andrewmorrison324]

Per the images, I have a sink and a countertop (2 separate components). The sink should be visible but for some reason it doesn't show up unless I hover over it or the counter, as I was in the image. Any thoughts?

Thank you

[barthbradley · Accepted solution]

Some ideas...

...try giving the sink a slight offset from host plane in Project. (via "Elevation From Level" parameter) 

...open sink family and make the Model Geometry Visible in Plan/RCP.  

...open countertop family and remove or hide mask in Plan View and make the Model Geometry Visible in Plan/RCP. 

This AKN Article may explain what is going on in your case and how to correct it :

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2016/EN...

[andrewmorrison324]

I changed the Model Geometry Visibilities and it worked perfectly! (the slight offset worked too) Thank you sir.