Show Zoom Factor

[c_gold]

Hi,

i was wondering if its possible to show the Zoom-Factor in Revit like in Archicad or other Software. 

If not is there a way to bring the Zoom Factor to 100% ?

Thanks in advance! 

Constantin

[ToanDN]

Zoom Factor based on what?  What would a zoom factor of 100% show, a 12" thick wall shown as 12" on your screen?

[c_gold]

Based to the Scale, like in every other Software. So if I'm working in a Floorplan and the Scale is 1:100 and the Wall is 50 long the wall on the display is 50/100 long. 

That would be useful to ensure Text, Section marks etc has the right size in the plan. 

[ToanDN]

---

@c_gold wrote:

Based to the Scale, like in every other Software. So if I'm working in a Floorplan and the Scale is 1:100 and the Wall is 50 long the wall on the display is 50/100 long. 

That would be useful to ensure Text, Section marks etc has the right size in the plan. 

---

You can use the keyboard shortcut ZS to Zoom Sheet Size, which is 100% scale of the active view or sheet.  But that is about it.

[constantin.stroescu · Accepted solution]

use ZS shortcut to see on screen the drawing at the chosen scale (as ToanDN mentioned in his post)

Then if you click on ZoomOut (2x) you will obtain a drawing at 50 percent from ...then again 50 percent..

If you have Dual Screen , then ZS works only on desktop no 1..