Shapehandles not working as expected

Shapehandles not working as expected

MVE1112
Advocate Advocate
267 Views
2 Replies
Message 1 of 3

Shapehandles not working as expected

MVE1112
Advocate
Advocate

Hello all,

I made a void family for pipe penetrations in walls.

 

I need to have lines for dimensioning the centre of the opening.

For some reason when i move the upper shape handle, the entire family moves instead of only the symbolic line..

MVE1112_0-1594634799890.png

MVE1112_1-1594634838974.png

 

 

Below i an image of the family itself.

 

MVE1112_2-1594634884432.png

 

Can anyone help me out?

 

0 Likes
268 Views
2 Replies
Replies (2)
Message 2 of 3

hmunsell
Mentor
Mentor

can you upload the family for us to look at?

Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.



EESignature


0 Likes
Message 3 of 3

barthbradley
Consultant
Consultant

The line is not constrained properly in the family. You can constrain it with dimensions pulled from the tips of the Line, or by Aligning and Locking the tips of the Line to Ref. Planes which are constrained by dimensions.

 

Constrain.png

0 Likes