Sections not showing on other lvl's

[s192019WWFUF]

Hello,

So i placed 3 sections on my first floor. Then when i go to my second floor, (Which has the exact same settings as my first floorplan) i cannot find the sections i'ved just created.

They are cutting through the whole building.

They are not hidding/Isolated.

The hide coarser than is set to 1:100 my plan is 1:100, ive tried multiply settings for this one, still not working. 

in the VG they are set ON!

[s192019WWFUF]

Hello,

So i placed 3 sections on my first floor. Then when i go to my second floor, (Which has the exact same settings as my first floorplan) i cannot find the sections i'ved just created.

They are cutting through the whole building.

They are not hidding/Isolated.

The hide coarser than is set to 1:100 my plan is 1:100, ive tried multiply settings for this one, still not working. 

in the VG they are set ON!

[barthbradley]

Maybe in another Phase? Maybe View Range doesn't intersect them? Maybe....

https://www.ideateinc.com/blog/2013/01/missing-something-in-revit-view-33

[barthbradley]

Maybe in another Phase? Maybe View Range doesn't intersect them? Maybe....

https://www.ideateinc.com/blog/2013/01/missing-something-in-revit-view-33

[ToanDN]

Your floor plans do not have the same settings, one is Medium and the other is Fine  (not to say Detail levels affect the display of section).  Create a view template from the 1st floor and assign it to the 2nd floor see if it helps.

[ToanDN]

Your floor plans do not have the same settings, one is Medium and the other is Fine  (not to say Detail levels affect the display of section).  Create a view template from the 1st floor and assign it to the 2nd floor see if it helps.

[GustavoUbriaco]

Hi

I think your sections hide at scales coarser than 1:100

If your flor plan is 1:200 o more than 1:100 It will be hide fot that configuration

[GustavoUbriaco]

Hi

I think your sections hide at scales coarser than 1:100

If your flor plan is 1:200 o more than 1:100 It will be hide fot that configuration

[s192019WWFUF · Accepted solution]

So ya, i've gotten a new sheetlist with updates, and just renamed one of the drawings, and didn't change the phase.... so ya

[s192019WWFUF · Accepted solution]

So ya, i've gotten a new sheetlist with updates, and just renamed one of the drawings, and didn't change the phase.... so ya

[barthbradley]

So, I guessed right! It was phase related! 

Winner, Winner, Chicken Dinner!   

[barthbradley]

So, I guessed right! It was phase related! 

Winner, Winner, Chicken Dinner!