Rotate skylight grid

[Anonymous]

Using a mass, I am creating a skylight, but the system is make the grid at weird angles if I use a trapezoid shape. If I make the mass as a rectangle, is it okay. How do I make it like the red marks on the screenshot?

Any and all help would be appreciated, as always! Thank you 

 

[barthbradley]

What about Sloped Glazing? You can change the Angle with that one. 

[constantin.stroescu]

you can use Align tool . Align > Select a Face or Edge you want to align with and then select a Grid Line.

[constantin.stroescu]

• I've made some diggings and it seems that, the clue is to begin the mass element as a rectangle

        Then Create Form >Solid Form , and finally stretch Edges so to turn the paralelipiped into your desired volume.

         I figure that Revit remember the object as an extrude rectangle and Aligns correct the Grid.

• It is possible to Align Grid to Vertical Faces , but you will need for the second Grid Line a Model Line placed on the Face of the Grids so to be the second reference for align .

[barthbradley]

[ToanDN]

Can you share the file?  I did a test and the UV grid of a divided surface seems to have the right angle.

Regardless, you can adjust the UV grid, including rotation, alignment, etc. by activating the grid configuration tool.

[Anonymous]

I'll try the sloped glazing and subdivide. 

In the mean time, here is file