Revit family view range

[Anonymous]

Hi, i have simple family of cube 300 cm height(30×30)
At 260 heught i cutted half
I have tried to change the view range if the family (between 100 and 200) so i will see at ref.plane 30×30 full squres(whithout the piece cutted)
But its not working at all. View range insude family is ignored

Can someone help please asap? Thanks alot!

[barthbradley]

Toggle your Preview Visibility to ON. 

[Anonymous]

Where is this visibilty?

[barthbradley]

On the View Control Bar (bottom near eyeglasses). 

[ToanDN]

Which category does that family belong to?

[Anonymous]

hi

family is attached

visibility is disabled

when I created family I have chose furniture template

I want the family to show only 30*30 empty square in view range(without the hidden lines or above lines as solid 

I tried to do that by view range but it doesn't seems to have any effect

thank you 

[barthbradley]

Change the Family to a cutable category, like Generic Model. 

[Anonymous]

How to change to cuttable?(the olan/RCP is cheked already

[ToanDN]

Try the revised family.  View range in family only has effect on certain categories such as Windows.

[Anonymous]

 should i rebuild all families again ?

[Anonymous]

This is great! How to revised the family please? Should i rebuild revised family again?

[planner_matlabi]

Don't Need rebuild all families again

Select Family Category and Parameter and change Furniture to Generic Model

BUT

The best , Change Visual Style Wireframe to Hidden Line after Load Family In project

[Anonymous]

Actualy i was wrong. This way i will hide the hidden lines. But what if i want the ref.plane to show specific view range?

[Anonymous]

I was wrong, the goal is to fits project view range cut plan

[planner_matlabi]

View Rang in Level Properties and Change Cut Plan Value BUT It has an impact on everything in Project

i Don't think , Don't Way for Changing for one Elements View Rang

[Anonymous]

Let me explain the problem:
I insert family to the project
But in project i see the family cut plane with all hidden line top and bottom
(Same as inside)
Thas not fits the level cut plane
In the project i want to see spesific view range of the family wich is not showing ...

[planner_matlabi]

Please Send Movie your proplem

[Anonymous]

In project 3d as you can see there are 4 squres 30*30 each.

But in project level view you see alot of solid lines same as in family...

I want that level will have also 4 squres 30*30 as in reality 3d

Thanks alot

[ToanDN · Accepted solution]

Try this revised family.  Why do you need 4 different sub-families when you can use one?

Screenshot shows how they display in Project.

[Anonymous]

Thank you very much
So if i understand correctly:
View range in family aplyied to generic models?