Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Reference Plane VS Reference Lines

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
XXalessio.amodioXX
374 Aufrufe, 3 Antworten

Reference Plane VS Reference Lines

Hi all,

As title I would like to know when you use Ref Plane and when Ref Line.

99 out of 100 in family creator I use Ref Plane.

Any thoughts?

3 ANTWORTEN 3
Nachricht 2 von 4
ennujozlagam
als Antwort auf: XXalessio.amodioXX

A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry.

A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

 

previous thread





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 4
syman2000
als Antwort auf: XXalessio.amodioXX

I use reference lines if you doing rotational angle. As well when you building generic annotation or titleblock, you only get to have reference line and no Reference plane.

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 4 von 4
ToanDN
als Antwort auf: XXalessio.amodioXX

Aside from what already been said, if you want 3d grips to stretch a model family in the project, use Ref Lines with associated Instance Length parameters in the family.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report