Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Project North Problem

9 ANTWORTEN 9
Antworten
Nachricht 1 von 10
Anonymous
640 Aufrufe, 9 Antworten

Project North Problem

Hi All, I've set up Project North on my project and for some reason only one of my views will rotate to Project north, all the others just stay as they are, anyone else encountered this issue, did you resolve?

 

Thanks.

9 ANTWORTEN 9
Nachricht 2 von 10
syman2000
als Antwort auf: Anonymous

 

Check and see if you have other that set to true north.

 

project north.png

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 3 von 10
Anonymous
als Antwort auf: syman2000

Yes, i have the view's set to project north but only one of the views actually rotates to project north.

Nachricht 4 von 10
syman2000
als Antwort auf: Anonymous

Check and see if you have scopebox set to none.

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 5 von 10
Anonymous
als Antwort auf: syman2000

scope box is set to None

Nachricht 6 von 10
syman2000
als Antwort auf: Anonymous

Did you or any of your teammate rotate the viewport crop? See if you can select the viewport crop and rotate it.

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 7 von 10
Anonymous
als Antwort auf: syman2000

no I haven't rotated the viewport crop nor has anyone else.

Nachricht 8 von 10
syman2000
als Antwort auf: Anonymous

Upload the file so we can take a look.

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 9 von 10
Anonymous
als Antwort auf: syman2000

Thanks, I can't upload file as this is a defence project. 

Nachricht 10 von 10
barthbradley
als Antwort auf: Anonymous

You set up "Project North"?  Do you mean "True North"? In other words, you set the "Angle to True North" in the Project Base Point Properties? 

 

Also, Orientation (e.g. Project North, True North) is a Plan View Property, not a global setting.  So, you need to set the Orientation for each Plan View. 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report