problem with zoom

[tcbrcs]

im having issues with zoom to fit. my drawing goes tiny at the bottom right,  when i turn on ref it is tiny and the ref box is huge. each tiem i change the view page the drawing disappear.  when i try to print the view ports are too huge, and i cant shrink it. So far ive tried to turn on/off crop, scale box etc and its not working

[barthbradley]

By chance, is the Internal Origin marker visible in the View?  

[tcbrcs]

yes I can see the arrow that goes in different directions, with the circle
with the x in it. My designs are a long distance to the south south west
of that marker.

[barthbradley]

Turn it off.  Its checkbox is under Site Category. 

[tcbrcs]

I turned it off, and it the zoom is still not zooming to fit. also when i
click elevations the elevation lines in in one place and my side view is a
good distance over.

[barthbradley]

I'm not understanding. Post some pictures.  

Also, posting file may help.  

[ToanDN]

@tcbrcs 

Turn Off: Internal Origin, Project Base Point, Survey Point.

[tcbrcs]

its only allowing me to post one pic. But as you can see my zoom isnt
allowing the drawing to come in bigger. I have to manuelly make it bigger
to design. Also you could see the design is in one spot, and the elevatoon
lines, some place else. normally when i opened a N
drawings is aligned on the proper elevation level.