Positioning panels in corner

[Mikeymore]

Hi all,

I have made a revit nested family of 2 steelpanels in a 90 degrees corner.

What I want is the outside corner always stick together with those 2 panels.

You can choose different thickness of each panel. Param measuremt is part-1 (deel-1) and part-2 (deel-2)

How can I best made this family, so the corners always stcik together?

Next question is: the user has to give 1 dimension (of deel 1) and the other part (deel-2) has to be together max 1060mm. The minimum of part 1 is 250mm. How can I put this in a formula?

Last question: is it possible if you load in a project thickness 80 (panel-1) that automatically panel 2 is also the same thickness?

Thanks in advance!

[Anonymous]

Hi, i can not open your file, because its version.

But try to use the "if" structure:
check this out.
https://atgusa.com/revit-family-parameters/

(if you can send a version <=2020 file, maybe i can open it)

[barthbradley]

@Mikeymore : I've read your post and looked at your file and I am unclear about what it is that you are trying to do.  Can you provide more information? 

[Mikeymore]

Hi, thanks for the time you took!

Hereby the explanation of my Family.

I have broke something, because dimension-2 of the voidposition of panel 2 isn't paramteric anymore.

It works in the family itself, but not as it is nested in the complete family?

Hope you can help me out with my problems?

Thanks in advance!

[Mikeymore]

What I want is just a "connecting" point in the inner corner, where the 2 panels meet.

That must always be together, no matter the thickness of the 2 panels.

I have tried it with a ref. plane, but didn't succeed. I places a ref plane at the cut voud inner corner of the panel family, but I don't see the ref plane anymore when loaded in the nested family.

Anybody a solution for doing this?

Thanks in advance!

[Mikeymore]

I made a reference plane and checked make origin in the inner corner and that works.