Overhead Beam visibility in Electrical Plan

[micah]

Hello,

I am working on the electrical plan and I need to show the overhead beams in my plan because the LED's will be recessed in those beams.

The setting I normally use to show overhead beam is - Range Base Level - Upper Floor

                                                                                    Range Top Level - Unbounded

                                                                                     Underlay Orientation - Look up  

The options for the structural beam in Visibility Graphics are also turned on.

Please advise me on how I can show the overhead beam.

Thank you!

[ToanDN]

Are the beams in your model or in a link file?

[micah]

Beams are in the model!!

[ToanDN · Accepted solution]

@micah

I am working on the electrical plan and I need to show the overhead beams in my plan because the LED's will be recessed in those beams.

The setting I normally use to show overhead beam is - Range Base Level - Upper Floor (current floor)

                                                                                    Range Top Level - Unbounded 

                                                                                     Underlay Orientation - Look up  

The options for the structural beam in Visibility Graphics are also turned on.

---

Also, make sure the view is set to Medium or Fine, or Structural beams category is set to Medium or Fine if you want to keep the view Coarse.

[micah]

Thank you so much @ToanDN!!

It worked 🙂 !!

[anna8luka]

hello

I have the same problem only with link structuel model, what can I do?