Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Options for making Ramps and Stairs vertically Room Bounding

4 ANTWORTEN 4
Antworten
Nachricht 1 von 5
miajpilgrim
473 Aufrufe, 4 Antworten

Options for making Ramps and Stairs vertically Room Bounding

Is it possible to make a Ramp element vertically Room Bounding? 

 

I understand it is possible to create sloped floors, however this process is cumbersome for complex boundaries, and does not allow us to automate or filter based on ramp geometry.

 

We have a similar issue with stair elements, where we're constantly needing to create non-existent ceilings to limit the bounds of cupboards under stairs.

 

Any help would be most appreciated!

Beschriftungen (3)
4 ANTWORTEN 4
Nachricht 2 von 5
miajpilgrim
als Antwort auf: miajpilgrim

Screenshot didn't seem to attach first time so here it is.

Nachricht 3 von 5
syman2000
als Antwort auf: miajpilgrim

For ramp I would use slope floor instead of ramp to get the room bounding. As for stair, I would use basic slope ceiling. 

 

syman2000_0-1690296867420.png

 

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 4 von 5
miajpilgrim
als Antwort auf: miajpilgrim

I understand it is possible to create sloped floors, however this process is cumbersome for complex boundaries, and does not allow us to automate or filter based on ramp geometry. Similarly with Scan to BIM, we need to avoid spending additional time in a project creating ceilings that don't exist.

Nachricht 5 von 5
nmcmahonTW94C
als Antwort auf: miajpilgrim

Agreed, We need to have the option to make stairs room bounding. esp when we have double helix type stair arrangements. Where two sets of stair occupy the same core.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report