Non-Continuous Rail structure to Start Post

[Anonymous]

 Hello All, 

 How to adjust the length of the Non-Continuous rail structure according to the location of start post. See above image

- I would like to extend the rail structure to meet the Start post. The start post has given a negative offset (-1'  0 1/2"). Please give direction.

Top rail has already been give the extension style ( 12" + Tread Depth)

Attached the Revit file also.

[L.Maas · Accepted solution]

I do not have Revit 2017 installed so here some screenshots.

I removed the offset from the start post but extended the path (about a tread length) and modified the toprail

[Anonymous · Accepted solution]

So, extending the rail sketch line is the only option. Thanks a lot Louis ! 

Sorry, for not mentioning the Revit version 🙂