Hello, there's possibility to change area value in tag room?
Is not uniform with design data.
.rvt attached.
Thank's
Modify area value in tag room
Accepted solution
The room tag calculated the area correctly.
If you want to write a different area, use a text instead of tag. a tag is used to reflect the real values.
Also you can add a shared parameter to the tag which you can fill with custom values.
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Yes this specific Area parameter is meant to measure only.
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
@MostafaElashmawy I undrestand the question, than'k.
Only one question: using a text to uniform the size hava to use 1.5 mm of height text, when the label of tag are 2 mm?
With 2 mm to text is bigger compared to the height of the tag.
Thank's
it seems that somebody changed the text size without changing its name.
2mm type should have 2mm text size.
& 1.5mm type should have 1.5mm text size.
you should update it.
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Yes I see.
But you need to change it.
The text size should match the text type name.
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
1) Yes I see. ==> The uneveness? Then I'm not wrong about this but program.
2) "The text size should match the text type name." ==> Yes but is for my convenience do that.
I can also do as in the pic that is the same, right?
But most important in this form is to undrestand if is the program that have nonuniformities between text and is not me that I'm wrong, right?
Thank's
Accepted solution
You are wrong.
check below video.
the text size depends on the value you enter in the type properties and not on the name of the type.
a text with text size =2mm will be the same regardless it's in a tag or in a normal text.
a text with text size =1.5mm will be the same regardless it's in a tag or in a normal text.
https://knowledge.autodesk.com/community/screencast/60f45622-e55b-4489-91dc-40a962412482
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
you're welcome.
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.