Model Text can't be copied

[GoldenGateNetwork]

Good morning, I have this model with a 3D Text (I wrote down "REVIT" as a sample text), I made this a few years ago. I have been trying to place the same text on the 4 sides of the model by copying, arraying, rotating... nothing works.

Any suggestion please?

Thank you

[barthbradley]

Sounds like the Model Text is improperly hosted. Can you post the file for us to inspect?  

[GoldenGateNetwork]

@barthbradley  good evening, thank you for your response, here you are the link of the file. I was unable to upload here:

https://drive.google.com/file/d/1w4K5thmVoa82ObH0vP8WjiqEFdzeqHcS/view?usp=sharing

Thank you

[_Vijay]

Did you tried with copy(CO) comment instead Ctl+C 

[barthbradley]

can you compress another way? I don't have WinZip. If you compress with Windows, you should be able to post it as an attachment. 

[FacebookGroupMember]

Sounds like the Model Text is improperly hosted. Can you post the file for us to inspect?




Source Message URL: https://forums.autodesk.com/t5/revit-architecture-forum/model-text-can-t-be-copied/m-p/9854056M30317...

[martijn_pater]

Perhaps try grouping and then copy (CO), not sure why it won't copy though...

[syman2000 · Accepted solution]

I've look at the model. The original model text lost it's associate host. Even if you want to mirror, it just fly off the model. So your easiest way is picked the surface of the frame and add text.

[_Vijay]

As per my insection need to just rehost. 

[GoldenGateNetwork]

Good evening @barthbradley , @_Vijay , @syman2000 , @martijn_pater , @FacebookGroupMember Thank you for your responses and sorry for the late response. kinda busy these days. I will follow your comments to fix this model, thank you very much to everyone