missing properties and project browser box

[Anonymous]

how can i open the project browser and properties box in revit 2013. they just disappeared. please help

[Anonymous]

I was having the same problem; the pallets I usually keep open weren't showing up when I opened my Revit project. I tried the suggestions indicated here and they didn't work for me. I use a separate monitor with an HDMI cable and when I switched the 'main display' from my monitor to my laptop screen in my computer's display settings, it fixed the problem--the browser pallets showed up in Revit.

[Anonymous]

Thank you for your reply,

Is that mean I need to consider the second monitor as a main screen ?

[Anonymous]

LIsa, Thank you for the short but perfect guide.

[Anonymous]

thanks

[Anonymous]

 I started in one multi-monitor scheme, moved to a different monitor arrangement, and lost some of my menus.  I solved this problem by switching to single-monitor, which brought the menus back. I wiggled them a little, switched back to multi-monitor, and voila! they stayed in the last place I moved them.

I'm a (recently) former ArchiCAD user.  AC had a phenomenal feature where multiple menu layouts could be saved into profiles.  Basically an interface profile manager.  It was a supremely handy feature: I was forever going between multi-screen work, single-screen work, and client presentations on a projector, and having these layouts stored saved me a ton of time.  Also helpful when I needed different sets of tools/windows for different stages of a project. 

Is this the correct forum for suggesting new features?  😃

[David_W_Koch]

---

@Anonymous wrote:
... 

Is this the correct forum for suggesting new features?  😃

---

You may want to search the Revit Ideas forum, to see if anyone has already posted a similar idea and, if so, vote for it, or, if not, create a new idea for this.

[Anonymous]

Hi,

Going to view>user interface> project browser did not bring up the project browser.

Other ideas?

[LisaDrago]

Hello - when check the user interface is there a check in the check box next to the project browser? Can you post an image of what you are seeing? LD

[Anonymous]

Thank you so much - for how to bring back Prop. & Project Browser.

Greatly appreciated

[Anonymous]

thank you very much !!

[Anonymous]

Go to View tab and User Interface pull down tab and check Project browser and Properties boxes.


Laura Diamante

HAYNES + OAKLEY
HEALTHCARE ARCHITECTS

331 W. Sierra Madre Boulevard
Sierra Madre, California 91024

T 626.836.5820 F 626.836.6549

laurad@haynesandoakley.com
www.haynesandoakley.com

[Anonymous]

Thank you so much!

[Anonymous]

I realize this is an old thread. But I have a similar issue with revit 2014.

Half of the properties pallete keeps disappearing. I use ctrl +1 to close it and reopen it with the same issue.

The only way to resolve it is to close revit down and open it back up again. This is only a temporary fix as it will happen within 5-10 minutes of opening a new session.

Can you please advise?

[Anonymous]

any solution for this?

[Anonymous]

Thanks really from the heart ... you are amazing 

[Anonymous]

Right click then browsers...Then click on project browser

---

---

[Anonymous]

This seams like the problem I've been trying to figure out for years now. However, when I go into Display Settings, my laptop is already only detecting a single monitor. There is no option to reset. Do I have to be connected to my other monitors? Any advice?

[Anonymous]

That works . Thank you very much .

[Anonymous]

ticking and unticking the box in user-interface doesn't change anything, any help?

[gurump]

If you're losing your mind like I was and have already done the View > User Interface > toggled the palettes on and off and still can't see them....     try this...
Go to your comp's display settings > Scale and layout > change the size from recommended to something small like 100% (I'm on a 4k monitor). If that works, then change it back. I was THIS close to installing Archicad.