Hi!
I have a family based on wall (its a shower), where both central elements have a visibility check. Then i made 2 families types, 1 with all elements visibles and 1 with the central faucet not visible.
But when i change from one type to the other, the height also changes:
Thats happening because its a wall based family? i tried with a generic model not based and didnt have that problem.
The Height Property is the built-In Offset From Level Parameter (or whatever it's called). You'll have access to the Parameter on Placement in the Project.
...Elevation from Level is what it is called.
You can associate this Parameter to a Host Family Parameter if you want to nest it into another Family and drive its offset through the Host.
Hello there,
I found that your "Comando sin Canilla" component is not ticking the box of Canila Pies options as shown in "Comando con Canilla" below:
Thus, you can tick the listbox so that the component will show the same model as below:
Note: If this solution helps, you can like this as a solution so that another user can find this solution as well.
🙂
Regards,
Ahmad Aldo
