lp - View Range and Ceilging plan

lp - View Range and Ceilging plan

Anonymous
Not applicable
572 Views
2 Replies
Message 1 of 3

lp - View Range and Ceilging plan

Anonymous
Not applicable

Hi,

 

Well I have Googled, trying to find out the answers to two questions:

 

after using Plan Views I created a Reflected Ceiling Plan (RCP) when go to the new Ceiling view, nothing can be seen! I've tried playing around with the View Range, I have also tried to understand VR (perhaps I need a tutorial for Dummies!) 

 

Can someone (anyone) tell me what it is I am doing wrong?  I have attached the model, perhaps this helps!?

 

Thx

0 Likes
Accepted solutions (1)
573 Views
2 Replies
Replies (2)
Message 2 of 3

hmunsell
Mentor
Mentor
Accepted solution

your reflected ceiling plan should be placed based on you Floor level. there is no need to make a RCP Plan level. 

 

remake your Ceiling plan based on the Main level.

Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.



EESignature


Message 3 of 3

ToanDN
Consultant
Consultant

Get rid of the RCP level and create a new ceiling plan view based on main level, then turn on Underlay, orientation = look down, Base = main, Top = Top of curtain wall.  Turn on Underlay for the ceiling plan is for you to see elements below the view range such as pony walls, casework, fixture, furniture in order to coordinate with the ceiling, lighting, HVAC, etc...