Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Level 0 to start at Certain Toposolid Elevation

2 ANTWORTEN 2
GELÖST
Antworten
Nachricht 1 von 3
nikitadoroshko7
260 Aufrufe, 2 Antworten

Level 0 to start at Certain Toposolid Elevation

Hey there,

I can't figure out how to start designing my project. I already have a toposolid and want my building's level 1 (0.000) to start form a certain elevation on this toposolid. In my example I want my building's level 1 (0.000) to start from an elevation of 4000 mm on toposolid. How can I do that? I all of my sub elements elevation bases are set to survey point, I set elevation for project base point to be 4000 mm but then level 1 became (-4000), so I might be doing something wrong. Help me please with this. Picture's attached. 

Thanks in advance. 

2 ANTWORTEN 2
Nachricht 2 von 3
ennujozlagam
als Antwort auf: nikitadoroshko7

https://www.youtube.com/watch?v=AkVFV97n5jM





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 3
nikitadoroshko7
als Antwort auf: ennujozlagam

Thank you so much!

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report