I need helping bounding my elevations into a room/level. I can drop an elevation into a room and it works as intended, but when I add elevations using the check boxes they span into adjacent rooms and full height of the building. Is there any way to adjust or prevent this?
Gelöst! Gehe zur Lösung
Gelöst von KraiggC. Gehe zur Lösung
If you place an interior elevation it should do that automatically. If you don't have one in the model you are working in, start a new project based off of the commercial default template, place an interior elevation then copy it to the clipboard, switch back to your project plan view and paste.
@KraiggC hello, can you please post some screen shot of what do you mean. what version of Revit do you have with this problem. thanks
I can't replicate the problem (see my screencast). Can you post a screenshot of the floor plan are where you drop the elevation bubble?
I running Revit 2016. I may have found the issue. The placement may have been off, I believed the room separation line would bound the elevation but it does not. When I move it between walls it stays inside the room. Although it is spanning the entire 3 floors but that's easily remedied.
Good observation although not entirely accurate but if your own reply solves your issue, mark it as a solution
YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION
Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.